Maxx M4E CNC Aluminum Rotary Hop Up Chamber for V2 M4 AEG
The Maxx Model Products M4E Hop Up Chamber for standard M4 AEGs is the newest model for 2024. The M4E is essentially a revised and updated version of the M4A. Some key features are the reworked internal tolerances, pivot pin with o-ring retention, included barrel shim o-rings, inlet adapter shims, and other minor dimensional tweaks to improve reliability and performance.
We've found this unit to be a welcomed upgrade over the older M4A as this has better compatibility with different buckings and barrel combinations. Please note that the BB retention system is optional. Removing this feature can help with feeding in certain cases where magazine fitment is sub optimal. Will accept nozzle lengths from 21.00mm to 21.25mm
CNC Aluminum Hopup Chamber M4E (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series.
The Hopup Chamber M4E unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
The Hopup Chamber M4E unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
The Hopup Chamber M4E unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.
More than that, the Hopup Chamber M4E unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.
***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!
Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability | |
Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series | |
Precision Rotary Dial Knob for fine hopup adjustments | |
Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot | |
Removable Steel Pivot Pin for ease of setup and maintenance | |
Accepted 21.00mm to 21.25mm nozzle length | |
Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use | |
Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately) | |
Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots | |
Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting | |
Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use | |
Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine | |
The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber | |
Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets | |
The Dual UV LED Tracer Module to glow BB in the dark ready! |