(PREORDER) SomoGear PEQ-15 UHP IR Laser + IR Illuminator


Case color
Laser color

Visible Laser + IR Laser + IR illuminator.

Co-Aligned VIS & IR laser, Zeroable Well.
Compatible with All Night Vision Goggles.

  • Fits for picatinny rail MIL-STD-1913
  • Durable polyamidematerial
  • Compatible with original mil-spec plug
  • Zeroableaiming laser, with clicking sounds
  • Focusable & adjustable IR illuminator
  • With programming function
  • Co-aligned VIS & IR aiming lasers (at 30 meters distance they are less than 10cm apart)
  • Compatible all generation Night Vision Goggles
  • 100% Brand New, for Airsoft use only
  • Ship from HongKong

Dimensions: 4.6” L x 2.7” W x 1.6” H
Weight: 6.1 oz (172g). without battery
Battery: 3V CR123A (not include)
Battery Life: >6 Hours (under all modes)

Visible Aim Laser
Output Power Low: ≤4.9mW
Output Power High: ≤20mW

IR Aim Laser
Output Power Low: ≤0.9mW
Output Power High: ≤20mW

IR Illuminator
Output Power Low: ≤4.9mW
Output Power High: ≤60mW




Configuration & Functions:

  • Tan/ Black Case
  • Focusable/Adjustable IR Illuminator
  • Visible Laser (Green/Red)
  • IR Laser
  • Co-aligned VIS & IR Laser

Package Include:
1 x PEQ-15 Aiming Laser Device
1 x Milspec Connector
1 x Tactical Storage Bag
1 x Tan Sticker
1 x Black Sticker

SomoGear IR Illuminator Pulse Rates Operation Manual

In addition to momentary and continuous modes of operation, the IR illuminator may be programmed to operate in pulse mode at either 1, 2, 4, 8 pulses per second.

To access the programming mode, the mode selector must be turned to the desired pulse rate within 5 seconds of pressing the FIRE button.

  1. With the Mode Selector turned to the P (program) position, hold down the FIRE button, orange indicator light up.
  2. Turn the Mode Selector to the IR position that corresponds to the desired pulse rate as shown in Table below.
    SomoGear PEQ-15 IR Illuminator Pulse Rates Mode Selector Position
  3. Release the FIRE button, the orange indicator flashing 2 times, and the pulse rate will be programmed, the set pulse rate will remain until it is programmed differently or canceled

How to cancel the Pulse Rate?

  • Set the rate to 0 pulse per second


  • Do not stare into the laser beams
  • Do not look into the laser beams through binoculars or telescopes
  • Do not point the lasers beams at mirror-like surfaces
  • Do not shine the laser beams into other individuals’ eyes